Abstract:
The apple processing industry generates large quantities of organic waste, presenting a major source of organic contamination. Consequently, finding an effective solution for valorizing this waste has become a pressing issue. This study aims to address two key concerns: (i) solving an agricultural problem by efficiently using agri-food residue, and (ii) removing lead, an extremely toxic element, from contaminated waters to mitigate environmental pollution. Two biosorbents were tested: raw apple waste (RA), obtained from a mixture of apple varieties, and the same material after extracting valuable bioactive and reusable components, extracted apple (EA). The study evaluated the influence of pH, initial biosorbent mass, adsorption kinetics, and equilibrium isotherms. The results are very promising, showing a lead removal efficiency of 82 % for RA and 100 % for EA at a low initial concentration of the solution of 20 mg Pb2⁺/L and an optimal pH of 5 ± 0.5. The Langmuir model predicted a maximum adsorption capacity of 44.6 mg/g for RA and 48.6 mg/g for EA. These findings demonstrate that apple waste, even after selective extraction of valuable bioactive components, can be effectively used for environmental remediation on a practical scale.